Auman Truck

Home > Guide > Aumark S 10.5T 125 hp 4x2: The Middle-Weight Intercity Truck Reviewed

2026-11-14 08:53:01

Aumark S 10.5T 125 hp 4x2: The Middle-Weight Intercity Truck Reviewed

Writer:Alan Chen(Foton Auman dealer)

Between a 7.5-tonner and an 18-tonner sits a class that gets overlooked: the 10.5-tonne 4x2. It carries roughly twice the payload of a light city truck but keeps the footprint, licence burden and purchase price of something a small operator can justify. For Costa Rican operators running between San José and the provinces, that middle ground is often exactly right. The Foton Aumark S 10.5T 125 hp 4x2 is listed at $22,453 with a Cummins engine and a ZF gearbox. We worked through the sheet to see whether the numbers hold up.

Front three-quarter view of the Foton Aumark S 10.5-tonne 4x2 cargo truck
Announcement number BJ1108VEJED-FA, sold for Costa Rica in left-hand drive.

Size, weight and what the payload figure really means

Gross vehicle weight is 10.5 tonnes and rated payload is 5.9 tonnes. Treat that 5.9 as a ceiling for a bare chassis, not a working number. A cargo or insulated body, a tail lift, fuel and the driver all come off it, so realistic usable payload on a finished truck usually lands well under five tonnes. Weigh the completed vehicle rather than planning from the chassis figure — it is the single most common way operators end up with a truck that cannot legally carry what their rate card assumes.

Dimensions are workable for mixed city and intercity work. Wheelbase is 4,500 mm, chassis measures 7,875 × 2,290 × 2,355 mm, and body width is 2,060 mm. That is long enough for a useful box but short enough for tight lanes and older yards. Axle ratings are 3.6 tonnes front and 7.2 tonnes rear, so make sure your loading pattern matches those two numbers individually — overloading one end is an enforcement problem even when the total is inside gross.

Side profile of the Aumark S showing the 4,500 mm wheelbase and chassis dimensions
A 4,500 mm wheelbase with a 2,060 mm body width balances body volume against city manoeuvrability.
"Rated payload is a chassis number. Weigh the finished truck before you build a rate card around it."

Engine and gearbox: 125 hp on rolling roads

The engine is a Foton Cummins ISF3.8s4R168 — 3,760 cc, Euro IV, producing 125 hp at 2,600 rpm. Torque is 600 N·m, delivered between 1,300 and 1,700 rpm, which is a wide, low band. That shape matters more than the peak: it means the truck pulls from low revs without the driver hunting for a gear, and it is why cruise control is genuinely usable on intercity legs rather than decorative.

Foton Cummins ISF3.8s4R168 engine installation in the Aumark S
Euro IV, 3.8 litres, 125 hp at 2,600 rpm and 600 N·m from 1,300 to 1,700 rpm.

The gearbox is a ZF ZF6S600 from Zahnradfabrik Friedrichshafen, driving a 4.33 rear axle. The sales title describes the truck as a ZF automatic, while the specification sheet names only the ZF6S600 unit — settle that with the dealer in writing before you order, because it changes driver licensing, clutch budget and which of your people can drive it. On rolling intercity roads this driveline is well matched to 10.5 tonnes. On steep gradients with a full payload you will be downshifting, and if long grades dominate your route you should be looking at an 18-tonne chassis instead of stretching this one.

Key figures worth checking before you buy

Gross vehicle weight
10.5 tonnes
Rated payload
5.9 tonnes
Engine
Cummins ISF3.8s4R168, 125 hp
Torque
600 N·m @ 1,300–1,700 rpm
Axles
3.6 T front / 7.2 T rear, 4.33
Price
$22,453

Cab and the equipment the driver actually uses

The cab is a single row with seating for three, left-hand drive, with manual tilt. Three seats matters more than it sounds on provincial delivery loops: a driver plus two loaders ride legally, without a chase vehicle. Manual tilt is the right call on a truck at this price — it is one less thing to fail, and access to the engine for daily checks is what matters.

Single-row cab of the Aumark S with seating for three
Single row, three seats, manual tilt — simple, serviceable and cheap to keep working.

Standard configuration is better than the price suggests: daytime running lights with front lower protection, front and rear drum brakes with a standard ratio and self-adjusting arms, reverse radar, cruise control, MP3, ABS, power steering and knitted standard seats. Windows and mirror adjustment are manual. The two items worth calling out are the self-adjusting brake arms, which reduce workshop visits, and the front lower protection, which is the kind of urban safety equipment that pays for itself the first time a car reverses into you.

Brakes, tyres, frame and running gear

Brakes are air-operated with drums front and rear and ABS control. Tyres are tubeless 235/75-R17.5-14, six road wheels plus a spare — a metric 17.5-inch size that is worth checking availability for in your area before you commit a whole fleet to it, since it is less universal than 16-inch light-truck sizes.

Wheel and tyre detail showing the 235/75-R17.5 tubeless tyre on the Aumark S
Six road wheels plus a spare on 235/75-R17.5-14 tubeless tyres.

The frame cross-section is 220 × 70 × 6 mm with leaf springs front and rear at 3 and 8+6 leaves, and fuel capacity is 200 litres. That tank size is generous for this class and suits long delivery loops between cities without a mid-day refuelling stop. Maintenance-wise, a Cummins engine and a ZF gearbox are the two names most workshops in Central America can support without special tooling.

Cold chain conversion: what to confirm with your builder

Cold chain transport is one of the two listed applications, and the base is suitable: the 220 × 70 × 6 mm frame and 4,500 mm wheelbase accept an insulated box and refrigeration unit without chassis modification, and the 200-litre tank with cruise control suits long loops. For agricultural and pharmaceutical work out of the central valley, that is a practical combination.

Aumark S chassis prepared for an insulated refrigerated body
Insulation and the cooling unit come straight out of the 5.9-tonne rated payload.

Two things need confirming before you sign anything. Compressor drive and alternator capacity should be checked with your bodybuilder, because a refrigeration unit is an electrical and mechanical load the base truck has to carry. And the equipment weight comes directly out of the 5.9-tonne rated payload, so a reefer built on this chassis will carry materially less freight than a dry box. Get both confirmed in writing.

Price, and the questions to settle before ordering

At $22,453 the Aumark S sits well below European and Japanese equivalents in this weight class. What you are buying is a Cummins and ZF driveline, air brakes with ABS, cruise control, reverse radar and daytime running lights on a Euro IV chassis. What you should not assume is the total cost of ownership: parts availability, service intervals and local warranty terms are commercial matters that vary by importer, and they are worth pricing out separately.

"Euro IV and left-hand drive are what is published. If your registration authority needs something else, find out before the order, not after it."

Three items belong on your checklist. Confirm that Euro IV is the standard your registration authority accepts for new registrations. Confirm left-hand drive is what your operation needs. And confirm whether the published price is a chassis or drive-away figure, with freight, insurance, duties and bodywork quoted separately — because the landed number is the one you budget against.

Aumark S cargo truck in a yard with box body fitted
The same platform is listed for urban logistics distribution and cold chain work.

Questions buyers ask before signing

Is 125 hp enough for intercity Costa Rica runs?

The ISF3.8s4R168 makes 125 hp at 2,600 rpm and 600 N·m between 1,300 and 1,700 rpm, driving a 4.33 rear axle through the ZF6S600. That suits 10.5 tonnes on rolling intercity roads with cruise control doing the work, but steep gradients with a full payload will see you downshifting. If long grades dominate your route, look at the 18-tonne Aumark instead of stretching this one.

How much payload is left after fitting a box?

Rated payload is 5.9 tonnes at a 10.5-tonne gross, and that is for the bare chassis. A cargo or insulated body, a tail lift and the driver all come off the number, so real usable payload usually lands well under five tonnes. Weigh the completed body before you commit, and match loading to the 3.6-tonne front and 7.2-tonne rear axle ratings so you are not overloading one end.

Can this Aumark S be converted for cold chain?

Yes. The 220 × 70 × 6 mm frame and 4,500 mm wheelbase accept an insulated box and refrigeration unit without chassis modification, and the 200-litre tank plus cruise control suit long delivery loops between San José and the provinces. Confirm compressor drive and alternator capacity with your bodybuilder, and remember the equipment weight comes straight out of the rated payload.

Is the gearbox a manual or an automatic?

The specification sheet names the ZF6S600 from Zahnradfabrik Friedrichshafen, while the sales title describes the truck as a ZF automatic. Ask the dealer which unit your build carries and whether a two-pedal option exists for your market. It affects driver licensing, clutch replacement costs and how quickly a new starter gets up to speed — so get it in writing.

Aumark S on an urban delivery route in Costa Rica
2,060 mm body width and a 4,500 mm wheelbase keep the truck usable in tight city lanes.
Aumark S

Foton Aumark S 10.5T 125 hp 4x2 Cargo Truck

A 10.5-tonne intercity truck for Costa Rica with a Cummins 3.8-litre engine and ZF gearbox, listed at $22,453 with a 5.9-tonne rated payload.

  • Foton Cummins ISF3.8s4R168 — 125 hp at 2,600 rpm, 600 N·m from 1,300 to 1,700 rpm, Euro IV
  • ZF ZF6S600 transmission, 4.33 rear axle, 3.6 T front and 7.2 T rear axles
  • 4,500 mm wheelbase, 220 × 70 × 6 mm frame, air brakes with ABS, 200 L fuel tank
View full specifications & prices →

Inquiry

Confirm Order

Production

(45 wordays)

Shipping

(7 days to port)

Send Inquiry for Lowest Price!

inquiry now!

Live chat

Contact

Tel:+8615960378211
Email:[email protected]

Address: Unit 8,room 704,NO.492,XingLinWan Road,Jimei District,XiaMen Fujian China

Address: Unit 8,room 704,NO.492,XingLinWan Road,Jimei District,XiaMen Fujian China
Email:[email protected]
© Authorized Dealer of FOTON AUMAN 2026 All Rights Reserved, Auman truck is a commercial vehicle brand under the Foton Daimler Privacy policy